After installing upgrade to new version of software, follow steps below to open the database you had been using in old version.
  1. Go to File
  2. Select Open/New
  3. Select database file
  • Note: File will be located in old version's default database location (see chart below) unless another folder was manually selected
  1. Click Open
Meet ManagerDefault Locations
SWMM 6C:\swmeets6
SWMM 5 or TFMM 5C:\swmeets5 or C:\tfmeets5
SWMM 4 or TFMM 4C:\swmeets4 or C:\tfmeets4
SWMM 3 or TFMM 3C:\swmeets3 or C:\tfmeets3
SWMM 2 or TFMM 2C:\swmeets or C:\tfmeets
SWMM 1.4 or TFMM 1.2cannot be converted
Team ManagerDefault Locations
SWTM 5, 6, 7, 8C:\TM5Data
SWTM 2, 3, 4C:\TMIIData
SWTM 1.6cannot be converted
TFTTM 3, 4, 4.1, 4.2C:\TFTM3Data
TFTM 1.2, 2C:\TFTMWinData
  • Note: Can't find your file? If old version is still installed, follow these steps:
  1. Open old version and look at topmost bar in left corner next to Database: for file name and location
  2. Make note of file path
  3. Close old version
  4. Open upgraded version
  5. Follow steps 1-3 again, using file path to find file