If you have a working copy of your software on another computer, you can use your license file from the existing installation for the new installation. If you have a working CD, an unexpired web delivery, wish to purchase a product replacement, or upgrade to the current version of the software please see Need to Reinstall for help with these processes. 
  • Note: You must have the most current version of your software to be eligible for a product replacement. 
  1. Install program on new computer
    1. Go to Web Delivery Links for Hy-Tek Software and download setup file for your software
    • If your software version is not listed, the set-up file is no longer available, please review Need to Reinstall for other options. 
    1. Run setup.exe that was downloaded in previous step
    2. When prompted to enter license code, close program 
  2. Place a flash drive into computer with working copy of Hy-Tek software
  3. Navigate to license file on computer, right-click on file and select copy (see picture below)
  • Note: This table lists the location and name of the needed license file
SoftwareLicense FileLocation
SWMM7
swmeet7.mem
C:\Hy-Sport\SwMM7
SWMM6
swmeet6.mem
C:\Hy-Sport\SwMM6
SWTM8
tm8.lic
C:\Hy-Sport\TM8
TFMM6
tfmeet6.mem
C:\Hy-Sport\TFMM6
TFMM5
tfmeet5.mem
C:\Hy-Sport\TFMM5
TFTM4-2
tftm4-2.lic
C:\Hy-Sport\TFTM4-2
SWBM5.1
sportsbm.mem
C:\Hy-Sport\SportsBM
Right-Click on License-File, then Choose Copy from Contextual Menu
  1. Navigate to your flash drive, right-click and paste license file to flash drive 
  • Note: You can also e-mail the license file to yourself as long as you have email access on both computers. 
  1. ?Remove flash drive and insert it into computer with new installation of software 
  2. Navigate to flash drive, and locate license file, right-click and copy file 
  3. Navigate to product folder (see table above), right-click and paste license file 
  4. When prompted select Copy and Replace 
Right-click in Program Folder, then choose Paste from Contextual Menu
  1. Double-click desktop icon to launch program
  • Note: The bottom left of the screen for your program should now read Licensed to: "your organization"